Home / News / Detail
Bag filter for water working principle
The bag filter is installed at the front end of each matched valve in the inlet pipe to protect the equipment on the pipe from wear and clogging. When the media enters the filter, the media enters the connected valve through the filter bag, while the impurities remain in the cylinder, so that the various valves will not fail due to the incorporation of impurities. The bag filter is a pressure type filter device. The liquid flows into the filter bag from the inlet pipe on the side of the filter housing. The filter bag itself is installed in the reinforcing mesh. The liquid bag penetrates the filter bag with the required accuracy grade and can obtain qualified. Filtrate, impurity particles are captured by the filter bag. It is very convenient to replace the filter bag, and there is no material consumption for filtration. The bag filter needs to be cleaned after the first use for a period of time to remove the impurities accumulated in the filter bag during the initial operation of the system. Bag filters need to be regularly checked for cleaning during use, and the frequency is determined based on the specific strength of use. When the filter is working for a period of time, some impurities will be deposited inside the filter bag. The pressure will increase and the flow rate will decrease. In this case, it shall be promptly removed. Before each maintenance, cleaning, the filter should be isolated from the pressure system. After cleaning, use a new gasket when reinstalling. Please pay attention to the direction of water flow during installation.
Looking forward to your inquiry for this bag filter for boiler bag filters for water.
© Copyright 2018 HANGZHOU FUYANG BONA WATER PURIFICATION EQUIPMENT CO.,LTD