Bag hose is a new type of equipment. It is mainly composed of a filter bag, shell, support rack and

Bag hose is a new type of equipment. It is mainly composed of a filter bag, shell, support rack and fixture, measuring devices, etc. The fluid flows from the filter entrance into the filter cartridges, with the miscellaneous quality piece retained on the surface or deep in, while clean fluid runs off from the outlet.

Filters adopt clamps, ordinary flange, fast shackle bolt to lock ears .They are very convenient for operation. With female or sanitary clamp connected in the top cap, it is used to install the gauge or platoon air valve, the inlet and outlet is connected with a flange, silk thread and sanitary clamp.

Bag hose has the following features of small cabbage, obvious filtering effectiveness, simple operation and low cost.

This kind of machine is made of SUS304 or SUS316 stainless steel.

How to change the bag filter for boiler, people usually spray the surface of the permanent filter with a special filter coating, this chemical can be bought in the hardware store and home improvement center. Follow the manufacturer's instructions, usually attached to the boiler shell, to clean this type of filter. Here's how to change the filter: Step 1: Locate the metal plate on the front of the boiler below the return air duct between the return air duct and the blower system. There may be a filter mark on the metal plate, or the metal plate forms the lid or front of the box top projection on the boiler shell.
step.
Slide the metal plate away from the hooks or unscrew the screws holding the metal plate from the casing or boiler frame. Some filters for heating appliances are often exposed; at this point you simply slide the filter up to move it from its U
Slide out of the shape of the track can be.
Looking forward to your inquiry for this  bag filter cage bag filter for boiler