Phone: +86-13486188591 Email: martin@bonawater.com

bag filter cage bag type filter

Home / Our Product / Detail

..
..
  • ..

bag filter cage bag type filter

Since many enterprises nowadays choose imported filters whose efficiency is different from that of domestic ones, the conversion relations between them are listed as follows:
According to European standards, coarse filter is divided into four (G1 ~ G4):
This is the description of bag filter cage bag type filter

Bag hose is a new type of equipment. It is mainly composed of a filter bag, shell, support rack and fixture, measuring devices, etc. The fluid flows from the filter entrance into the filter cartridges, with the miscellaneous quality piece retained on the surface or deep in, while clean fluid runs off from the outlet.

Filters adopt clamps, ordinary flange, fast shackle bolt to lock ears .They are very convenient for operation. With female or sanitary clamp connected in the top cap, it is used to install the gauge or platoon air valve, the inlet and outlet is connected with a flange, silk thread and sanitary clamp.

Bag hose has the following features of small cabbage, obvious filtering effectiveness, simple operation and low cost.

This kind of machine is made of SUS304 or SUS316 stainless steel.

bag filter cage
bag filter cage
bag type filter
bag type filter
bag filter cage       bag type filter
bag filter cage bag type filter

 Different efficiency of air filter means
When the concentration of dust in the filtered gas is expressed in terms of the concentration by weight, the efficiency is the efficiency of the weight measurement; when expressed in terms of the counter concentration, the efficiency is the efficiency of the efficiency; when expressed in other physical quantities, it is the colorimetric efficiency or Turbidity efficiency and so on.
The most commonly used method of expression is the counting efficiency expressed as the concentration of dust particles in the inlet and outlet airflow of the filter.
1. In the rated air volume, according to the national standard GB / T14295-93 "air filter" and GB13554-92 "efficient air filter" requirements, the efficiency of different filters range is as follows:
Initial effect filter, ≥ 5 microns particles, filtration efficiency 80> E ≥ 20, the initial resistance ≤ 50 Pa
Medium efficiency filter, ≥ 1 micron particles, filtration efficiency 70> E ≥ 20, the initial resistance ≤ 80 Pa
High efficiency filter, ≥ 1 micron particles, filtration efficiency 99> E ≥ 70, the initial resistance ≤ 100 Pa
Sub-efficient filter, ≥ 0.5 micron particles, filtration efficiency E ≥ 95, the initial resistance ≤ 120Pa
High efficiency filter, ≥ 0.5 micron particles, filtration efficiency E ≥ 99.99, initial resistance ≤ 220Pa
Ultra-high efficiency filter, ≥ 0.1 micron particles, filtration efficiency E ≥ 99.999, initial resistance ≤ 280Pa
2. Since many enterprises nowadays choose imported filters whose efficiency is different from that of domestic ones, the conversion relations between them are listed as follows:
According to European standards, coarse filter is divided into four (G1 ~ G4):
G1 efficiency of particle size ≥ 5.0μm, filtration efficiency E ≥ 20% (corresponding to the United States standard C1)
G2 efficiency of the particle size ≥ 5.0μm, filtration efficiency 50> E ≥ 20% (corresponding to the United States standard C2 ~ C4)
G3 efficiency of particle size ≥ 5.0μm, filtration efficiency 70> E ≥ 50% (corresponding to the United States standard L5)
G4 efficiency of the particle size ≥ 5.0μm, filtration efficiency 90> E ≥ 70% (corresponding to the United States standard L6)
Medium efficiency filter is divided into two levels (F5 ~ ~ F6):
F5 efficiency of the particle size ≥ 1.0μm, filtration efficiency 50> E ≥ 30% (corresponding to the United States standard M9, M10)
F6 efficiency of the particle size ≥ 1.0μm, filtration efficiency 80> E ≥ 50% (corresponding to the United States standards M11, M12)
High school filter is divided into three levels (F7 ~ ~ F9):
F7 efficiency on the particle size ≥ 1.0μm, filtration efficiency 99> E ≥ 70% (corresponding to the United States standard H13)
F8 efficiency of the particle size ≥ 0.5μm, filtration efficiency 90> E ≥ 75% (corresponding to the United States standard H14)
F9 efficiency on the particle size ≥ 0.5μm, filtration efficiency 99> E ≥ 90% (corresponding to the United States standard H15)
Sub-efficient filter is divided into two levels (H10, H11):
H10 efficiency on the particle size ≥ 0.5μm, filtration efficiency 99> E ≥ 95% (corresponding to the United States H15 standard)
H11 efficiency on the particle size ≥ 0.5μm, SEO, filtration efficiency 99.9> E ≥ 99% (corresponding to the United States standard H16)
High efficiency filter is divided into two levels (H12, H13):
H12 efficiency on the particle size ≥ 0.5μm, filtration efficiency E ≥ 99.9% (corresponding to the United States standard H16)
H13 efficiency on the particle size ≥ 0.5μm, filtration efficiency E ≥ 99.99% (corresponding to the United States standard H17)
Looking forward to your inquiry for this bag filter cage bag type filter

Related Products

bag filter for boiler       bag filter suppliers

bag filter for boiler bag filter suppliers

bag filter cage      bag filter suppliers

bag filter cage bag filter suppliers

bag filter for boiler      bag filter system

bag filter for boiler bag filter system

 bag in bag out filter housing   bag filter housing

bag in bag out filter housing bag filter housing

bags and filters    bag filter for boiler

bags and filters bag filter for boiler

bag filters for water   bag filter housing

bag filters for water bag filter housing

Inquiry

Meeting customer needs is our only goal and motivation

We offer the best quality, the best service and the fastest response, just to reassure the customers